Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Trusted Chimney Sweep for Richardson Homeowners
A wood-burning fireplace is one of the best parts of winter in Richardson, and a neglected flue is one of the worst surprises a homeowner can find. Creosote builds up quietly through every fire, and when it reaches a certain thickness it stops being a nuisance and becomes fuel. Our technicians have up to 15 years of experience sweeping, inspecting, and repairing residential chimneys, and they work from a curated set of professional product lines rather than whatever a supply house had on the shelf. We handle the full job in one visit: sweep, inspect, and document what we found with photos you keep. We answer 24/7, dispatch Sunday through Friday from 7am to 7pm, and closed Saturdays. Call (888) 873-4715 to book.
Chimney Sweep Services
Chimney Sweep Services cover everything that keeps a flue safe between seasons: removing creosote and soot, checking the firebox and damper, confirming the cap and flashing still do their job, and leaving you with evidence of the chimney’s actual condition. You need this when you’ve burned a cord of wood or more since the last cleaning, when smoke rolls back into the room, or when you simply don’t know the last time it was done. We work with brands like Copperfield and Olympia Chimney for caps and weatherproofing because generic hardware doesn’t fit properly and doesn’t last. A standard sweep typically runs $150 to $300, with the final price set by the written estimate before we start.
What a Standard Sweep Covers
A standard sweep includes brushing the flue, clearing the smoke shelf and damper area, vacuuming the firebox with a HEPA machine, and bagging the debris so nothing settles in your living room. We check the cap from the ground and inspect as much of the flue interior as the run allows.

When to Book a Sweep
Book a sweep before the first cold snap, not after. In Richardson, that means scheduling late in the fall, or once you’ve burned roughly a cord of wood since the previous cleaning. If you’re moving into a home and don’t know the history, book one now.

Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Chimney Cleaning
Chimney Cleaning is the deeper version of a routine sweep, done when buildup has gone past the light dusting stage or when the firebox and smoke chamber need the soot cleared as well as the flue. You know it’s time when you smell smoke on cold days with no fire lit, when the glass doors stay black after cleaning, or when a previous owner left no record of service. We clean the entire system, not just the flue the brush reaches, and we bag everything at the source. Pricing depends on how much buildup we find and whether scaffolding or a roof-level visit is required; most jobs land in the $150 to $450 range.
Creosote Grades and Why They Matter
Creosote comes in three stages and the third, a shiny glazed deposit, bonds to tile and resists ordinary brushing. It needs a rotary method or a resurfacing product rather than a standard sweep, so knowing its grade matters.
Cleaning Without the Mess
We run HEPA vacuums at the firebox and bag debris on the way out, and we lay drop cloths before a brush goes up the flue. Nothing gets swept onto the floor or left on the hearth for you to clean up afterward.
Fireplace Cleaning
Fireplace Cleaning targets the firebox itself: the hearth, the grate, the brick face, the glass doors if you have them, and the ash bed, all of which collect soot and residue that flue brushing alone never touches. You need it when the firebox has become a soot-streaked mess, when ash has piled up so high it changes how the fire draws, or when the fireplace is going to be off for months. We clean the brick and stone with products that pull soot out of the pores without stripping the finish, and we check the damper seal while we’re there. Typical fireplace cleaning in Richardson runs $120 to $250, quoted before we begin.
Inside the Firebox
Ash holds fine soot that floats the moment you disturb it, so we extract rather than sweep. If the firebox walls show cracking or spalling brick, we flag it right then and explain what it means, without pushing work you don’t need.
Glass Doors and Grates
Blackened glass comes from an incomplete burn as much as soot, and cleaning it only masks the symptom. We clean it properly and point out what in your burning habits is causing it, so you’re not cleaning it twice as often.
Chimney Services
Chimney Services is the umbrella over everything we do at Ridgeway Chimney Sweep: sweep, inspect, and repair, all under one company, so you’re not playing phone tag between a sweep and a mason and a roofer. You need the full service when your chimney has more than one issue, or when you want a complete picture before you spend money on anything. We use DuraFlex flexible liner systems for aging flues, HeatShield for resurfacing, and Gelco and Famco components for caps and flashing. Price ranges vary by task, from roughly $150 for a sweep up to a few thousand for a reline, always set by a written estimate.
One Company, No Coordination
Our technicians handle cleaning, structural repair, and formal inspection in the same visit when possible. That keeps the answers consistent: whoever swept your flue is the same person who explains what the inspection found and what it would take to fix it.

Repairs Built to Last
A flue problem fixed with the wrong material comes back. We use DuraFlex liners and HeatShield resurfacing because they’re the products chimney professionals specify, not substitutes chosen for what’s easiest to find.
Chimney Sweep Certified
Chimney Sweep Certified work is what you get when your technician has been trained to the standards the trade expects and can back up the inspection with documentation. You want certification-level care when you’re buying a house, when a previous sweep gave you a vague answer, or when a real estate transaction hinges on a clean inspection report. Our technicians have up to 15 years of experience, and we give you a written record of the inspection with photos of what we found, so you can verify it yourself. A certified sweep with a photo report typically runs $200 to $350, and the estimate is free.
What Certification Means in Practice
It means the technician knows how to inspect a flue, not just brush it, and knows when a crack is cosmetic and when it needs a liner. It also means the documentation holds up if a buyer’s inspector asks questions later.
The Photo Report You Keep
We photograph what the camera sees inside the flue and hand you the full record. It’s the difference between being told something and being shown it, and it’s yours to keep for as long as you need it.
Gas Fireplace Cleaning
Gas Fireplace Cleaning is for vented and vent-free gas units that don’t produce creosote but do collect dust, soot from the pilot, and debris in the logs and ports over time. You need it when the flame has turned yellow where it used to be blue, when the logs look dusty or the glass fogs, or when the fireplace hasn’t been serviced since installation. We clean the burner ports, logs, and glass, check the venting, and confirm the unit is drawing properly. Gas fireplace cleaning in Richardson typically runs $120 to $280, with the estimate given before we start work.
Cleaning the Burner and Logs
Dust and soot on a burner assembly disrupt the flame pattern and can waste gas while making the fire look wrong. We clean them by hand so the flame returns to its proper shape.
Venting and Draft Check
A gas fireplace still needs to vent correctly, and a blocked or disconnected vent is a real safety concern. We check the vent path and test the draw before we call the job done.
Chimney Maintenance
Chimney Maintenance is the routine care that keeps a flue from turning into a repair bill: annual sweep, inspection of cap, flashing, crown, and masonry, and taking care of small problems while they’re still small. You need it once a year if you burn wood, and every couple of years for a gas unit that’s regularly serviced. We check caps and flashing sourced from Copperfield and Olympia Chimney, and we use Famco components when a flashing repair is needed. An annual maintenance sweep typically costs $150 to $300, and we tell you plainly when something can wait another year.
Cap, Crown, and Flashing
Water is a chimney’s worst enemy, and most long-term damage starts where the cap or flashing has come loose. We check these on every maintenance visit so a small leak gets caught before it reaches the frame.
Masonry and Mortar Checks
Loose mortar and cracked crowns are common in Richardson’s heat cycles and are cheaper to repoint than to rebuild. We note their condition in the inspection report with photos, and we tell you honestly if the timeline is flexible.
Brands We Service
We work with Olympia Chimney equipment and know where their caps and venting components tend to wear, which matters when a replacement part has to fit an existing flue exactly. We use Famco flashing and venting components for code-compliant weatherproofing, and we know what a proper seal looks like on their products.
DuraFlex flexible liner systems are our go-to for relining an aged or damaged flue without full reconstruction, and we’re authorized to install and work with them. Copperfield components show up across the trade for a reason, and we’re comfortable with them in the systems we service. Whether you have Olympia Chimney, Famco, DuraFlex, or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Strong smoke smell in the house when no fire is lit. That’s usually a blocked flue or a failing damper, and it means the chimney isn’t drawing the way it should. It needs a look before the next burn.
- Visible creosote on the flue walls. A glazed, shiny coating is grade 3 creosote, the kind that fuels a chimney fire. It won’t come off with an ordinary brush, so it needs proper treatment.
- Smoke rolling back into the room. Back-drafting points to a restriction, a pressure problem, or a cap that’s blocked. It’s also a carbon monoxide risk, so don’t ignore it.
- Damaged or missing chimney cap. A missing cap lets rain, birds, and debris straight into the flue. A loose or cracked cap lets water into the masonry where it does the most damage.
- Crumbling mortar or cracked crown at the top. The crown sheds water away from the flue, and when it cracks, water gets in. Repointing and a crown repair now beat a rebuild later.
Our Process, Step by Step
- 1
Book the visit. Call (888) 873-4715 and we’ll book your sweep. We answer 24/7, fast dispatch from 7am to 7pm Sunday through Friday, and we’re closed on Saturday.
- 2
Protect the room. Before a brush goes up the flue, we lay drop cloths and set up a HEPA vacuum at the firebox so nothing escapes into the room.
- 3
Sweep the flue. We brush the length of the flue, clear the smoke shelf and damper, and bag the debris as we go. The firebox and hearth come clean last.
- 4
Inspect with a camera. We run a camera down the flue to look for cracks, missing mortar joints, and creosote the brush couldn’t reach. The photo report is yours to keep.
- 5
Walk you through the findings. We show you what we found, tell you what needs attention now versus what can wait, and put it in a written estimate before any work is booked.
How Much Does Chimney Sweep Cost in Richardson?
A standard chimney sweep in Richardson typically runs $150 to $300 depending on the length of the flue, how much creosote has built up, and whether the cap or firebox needs extra attention. A sweep combined with a camera inspection usually lands between $200 and $350, and that’s the most common booking for a homeowner who doesn’t know their flue’s history. If the inspection turns up a problem, the estimate changes: a HeatShield resurfacing job runs $800 to $2,000, and a full DuraFlex liner installation runs higher, depending on flue length and diameter.
What drives the price is buildup (light ash vs. glazed creosote), flue length, access to the roof, and whether the job is a simple sweep or a sweep plus inspection. To avoid overpaying, ask for a written estimate before any work starts, ask for the inspection report with photos so the recommendations are tied to something you can see, and be wary of anyone who quotes big repairs before they’ve looked inside the flue.
What’s included in our free estimate: the sweep, the camera inspection, the photo report, and a written price for any recommended work. Nothing gets added after the fact. If the inspection finds that the repair can safely wait a season, we’ll say so. Call (888) 873-4715 for an exact quote. Estimates are free.
Our Service Area Near Richardson
Ridgeway Chimney Sweep serves Richardson and the surrounding communities, including Lucas, Wylie, Fairview, Rockwall, Lavon, Fate, Princeton, Prosper, and Royse City. If you’re nearby and ready to book, we’ll let you know the earliest opening. You can also read more about our chimney sweep work for homeowners in Lucas, or explore our chimney sweep service for Wylie residents. We book customers in Richardson and the surrounding towns with fast dispatch from 7am to 7pm, Sunday through Friday, and we’re closed on Saturday.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About Chimney Sweep in Richardson
A chimney sweep is a trained technician who removes creosote, soot, and debris from a flue and firebox so the chimney vents safely. At Ridgeway Chimney Sweep, a sweep also includes a camera inspection and a photo report. It’s not just cleaning; it’s a check on the whole system. Call (888) 873-4715 to book one.
A standard sweep typically takes 45 minutes to an hour and a half, depending on flue length and buildup. A sweep combined with camera inspection usually runs closer to two hours. We’ll tell you the expected window when you book. Call (888) 873-4715 for scheduling.
A typical sweep runs $150 to $300, and a sweep with camera inspection runs $200 to $350. The written estimate sets the final price, and we don’t add anything after the fact. Call (888) 873-4715 for an exact quote. Estimates are free.
Yes. We service Olympia Chimney caps and venting components, and we source replacement parts in that brand because they’re built for chimney weatherproofing. If your cap needs replacing, we’ll match the fit to your flue rather than a generic substitute. Call (888) 873-4715 to talk through what you need.
Same-day booking is often possible, and our crews dispatch from 7am to 7pm, Sunday through Friday. We’re closed on Saturday. Call (888) 873-4715 and we’ll tell you the soonest available time. We answer 24/7.
We stand behind the work we do, and we put the scope and terms in writing before we start. If something we installed or repaired isn’t right, we come back and make it right. Call (888) 873-4715 and we’ll walk you through what’s covered.
Clear the area around the hearth and fireplace, remove any decorations or fireplace tools from the mantel, and secure pets in another room. Move rugs back from the hearth if possible. We handle the drop cloths and the cleanup. Call (888) 873-4715 to book.
Schedule Your Chimney Sweep Service in Richardson Today
Ready to get your chimney swept, inspected, and documented before the next burn? Call (888) 873-4715 to book. We answer 24/7, fast dispatch from 7am to 7pm, Sunday through Friday, closed Saturday. You’ll get a free, no-obligation estimate, a camera inspection with a photo report you keep, and a clear answer on what your chimney actually needs. Read more about our full chimney repair and chimney inspection services, or book your sweep today.
Written by the team at Ridgeway Chimney Sweep.