Sweep & inspection
Caps & crowns
Flue relining
Masonry repair
Gas fireplace serviceLevel 1 sweep and inspection to the NFPA 211 annual standard - flue, crown, cap, and flashing checked and photographed
Chimney sweep logs do not sweep chimneys. They loosen some creosote - which then falls where a brush and vacuum still have to collect it.
Chimney Company in Richardson, TX
Chimney inspection in Richardson, TX is the work most homes here actually need. The city’s 1950s – 1970s ranch homes were built with original clay tile flues, and those liners have had a half century of North Texas foundation movement to crack them. Fireplaces here run lightly and rarely, so the risk isn’t heavy soot – it’s slow, glazed creosote and masonry that has quietly aged. We sweep, inspect and repair, and we show you what we find on camera before anything gets recommended. Call (888) 873-4715. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Richardson Homes Are Different
Richardson was built out during the Texas Instruments-era suburban boom, and that building pattern still shapes every chimney call we take here. Whole subdivisions of brick single-story ranches went up with masonry fireplaces and clay tile flues, and most of those flues are still original today. Five decades of North Texas on expansive clay soils means the ground under these houses moves, and chimneys move with it – which is why hairline cracks in tile liners show up on camera more often than heavy soot does. The region’s short, mild winters with occasional hard freezes encourage sporadic burning rather than daily fires, and sporadic use is exactly what produces glazed, sticky creosote that a brush alone won’t take off. Storm-driven wind and hail also take a toll up top, cracking crowns and knocking caps loose. Add gas log sets and inserts retrofitted into many of these fireplaces, and you get a chimney whose venting needs don’t match the flue it was born with.
Styles & brands we work with
- Sweep & inspection
- Caps & crowns
- Flue relining
- Masonry repair
- Gas fireplace service
Our Main Richardson Services
Richardson homeowners call us about two things most often: getting the chimney swept before the burning season, and getting a crack or a cap fixed before it becomes a bigger job.
Chimney Sweep in Richardson
A sweep in Richardson starts with a look at what’s actually in the flue, not a preset schedule. In these ranch homes we often find light soot with patches of glazed creosote where fires burned cool, plus debris and animal nesting that came in through a loose cap. We run a camera first, then sweep to what the flue holds, keep the work area sealed, and hand you photos of the before and after. If the liner shows cracking from soil movement, you’ll see it. Book a Chimney Sweep in Richardson and we’ll tell you what your chimney actually needs.

Chimney Repair in Richardson
Repair work here tends to center on the top of the chimney and the flue itself. Hail and wind crack masonry crowns, loose caps let water in, and original clay tiles crack from years of ground shifting under the house. We rebuild crowns and flash with Famco components, reset caps sourced from purpose-built chimney supply brands, and reline where the tiles are too far gone, using DuraFlex flexible liner systems for aged flues. Spa treatment for your masonry? No – just the right materials for the job. For Chimney Repair in Richardson, we quote the work from what the camera shows.

Chimney Inspection in Richardson
A Chimney Inspection in Richardson is less about soot and more about the condition of a flue that’s been sitting in the same brick chimney since the Eisenhower era. The 1950s – 1970s ranch homes that dominate neighborhoods like Canyon Creek and Cottonwood Heights were built for light, seasonal wood burning in a mild climate, and most have original clay tile liners that have spent five decades absorbing North Texas foundation movement. The liners crack. The crowns weather. Gas log sets retrofitted into fireplaces built for wood change how the flue vents. A camera inspection is how you find out which of those problems you actually have, instead of guessing.
Chimney Inspection Services
Signs you need it
You need an inspection if you’ve never had one on a house of this age, if you smell smoke in the room when the fire is lit, or if you’ve noticed staining or a cracked crown on the outside of the chimney.
What it costs in Richardson
A standard inspection typically runs $99 – $175 in Richardson, and a level 2 camera inspection typically runs $175 – $350.
How we do it
We inspect the firebox, damper, flue and cap, run a camera down the flue to record the liner condition, check the crown and flashing, and give you a written report with photos before we recommend anything.
Level 2 Chimney Inspection
Signs you need it
A level 2 inspection is what you want after a chimney fire, after an earthquake or major storm, when you’re buying or selling a home, or when you’ve changed the appliance venting with a new insert or gas log set.
What it costs in Richardson
A level 2 camera inspection typically runs $175 – $350 in Richardson.
How we do it
We go beyond the standard visual check: camera through the full flue length, inspection of accessible portions of the chimney interior and exterior, and documentation of every defect with photos you keep.
What Chimney Inspection Costs in Richardson
| Item | Typical range in Richardson |
|---|---|
| Standard chimney inspection | $99 – $175 |
| Level 2 camera inspection | $175 – $350 |
| Camera inspection with written photo report | $175 – $350 |
Do I really need a camera inspection on a 1960s Richardson ranch home?
Yes, if the flue has never been scoped. Hairline cracks in original clay tile from decades of soil movement are invisible from the firebox, and only a camera shows them. Call (888) 873-4715 for an exact quote – estimates are free.
Can an inspection tell me whether my fireplace is safe to burn this winter?
It can, and that’s the point. The camera and crown check show whether the flue is sound, whether the damper seals, and whether creosote has built to a level worth sweeping. We tell you plainly when work can wait.
Brands We Service in Richardson
We work with a defined set of professional-grade brands – DuraFlex flexible liners, Olympia Chimney caps, Famco flashing and venting components, Copperfield chimney parts – the same lines specified by chimney professionals nationwide. We don’t stock parts; we specify the right component and source it, which keeps turnaround tight. You can read about the full list on our brands page.
See the difference
Before
After
Before
After
Before
AfterPricing for Chimney Company in Richardson, TX
| Service | Typical range in Richardson |
|---|---|
| Standard chimney inspection | $99 – $175 |
| Level 2 camera inspection | $175 – $350 |
| Chimney sweep (standard) | $125 – $275 |
| Crown repair or rebuild | $275 – $650 |
| Chimney cap installation | $150 – $450 |
| Flue relining (per foot) | $26 – $55 per linear foot |
What pushes price up in Richardson: cracked original clay tiles that need relining rather than sweeping, crowns damaged by hail, and gas log retrofits that require a flue evaluation before we can advise. Every price is set per job by the written estimate, so you know the number before we start.
Neighborhoods We Serve in Richardson
We work across Richardson’s older ranch subdivisions and the neighborhoods around them. The housing stock is consistent enough that the same issues come up again and again – original clay tile, aging crowns, retrofitted appliances – which means we’re rarely surprised on arrival. Response is the same across the city; the drive times out to the edges of Richardson are short enough that scheduling isn’t a factor.
- Heights
- Canyon Creek
- Cottonwood Heights
- Prairie Creek
- Breckinridge
Service Area – Cities Near Richardson
Richardson sits inside a cluster of North Texas suburbs with similar ranch-era housing, and we work those too. If you’re just outside the city, we’ll cover your sweep, inspection or repair call from our coverage into Wylie, TX, Fairview, TX, Lucas, TX and Rockwall, TX. The same clay tile liner problems and storm-damaged crowns show up across that whole corridor, so the advice doesn’t change.
Serving Richardson, TX – Our Local Coverage Area
We serve Richardson and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Chimney Company in Richardson
Dispatch runs Sunday through Friday, 7am to 7pm, closed Saturday, and we schedule Richardson calls into the earliest opening. We answer 24/7. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Most repairs to the chimney itself don’t require a city permit, but exterior changes that affect the roofline or visible structure sometimes do, and some Richardson HOAs control exterior materials. Ask your city’s building department and check your HOA rules before any major rebuild.
Yes. We work the full city, from the Heights down through Canyon Creek and Cottonwood Heights, plus the nearby suburbs. Call (888) 873-4715 to confirm your address and get an estimate. Estimates are free.
If your Richardson home has a fireplace you haven’t had looked at, the estimate costs you nothing and the camera report tells you what’s really going on. Call (888) 873-4715 for a free estimate. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. Our technicians have up to 15 years of experience, we work with industry-trusted brands, and we tell you what your chimney actually needs – nothing more.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local chimney cleaning pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Richardson Customers Say
"Crown was cracked and taking water. Repaired it rather than quoting a rebuild, which the previous company had pushed hard for."
- Marisol Vargas"Liner was cracked in two places. He walked me through the repair options honestly, including the one that was cheaper for him and better for me."
- Kristen Miller"Fireplace had never drawn properly since we moved in. He found the damper was only opening halfway due to a bent linkage and fixed it in ten minutes."
- Vivian Wong